Combination Keel Machine

T-shaped keel automatic corner bone forming machine

  • Product description: We will use a double-row wheel design, respectively, C and U, no manual adjustment. With double punching device, the punching device can be adjusted left and right, and the punching mode is servo moto
  • INQUIRY

T-shaped keel automatic corner bone forming machine

T-shaped keel automatic corner bone forming machine Technical parameters:
Electrical control
A. Plc
B. Inverter [Delta]
C. Length encoder [Rip]
D. Remote control host
E. Servo motor tracking punching cut
2. Hydraulic
A. Hydraulic pump station: 7.5kw
B. The electromagnetic valve
C. Hydraulic cylinder
3. Forming host
A. Main motor power: 5.5kw
B. Number of forming wheel rows: 12 rows
C. Molding wheel material: Cr12Mov heat treatment surface hard chrome plating
D. Spindle diameter: 60mm
E. Spindle material: 45# steel, heat treatment (tempering)
F. Discharge shelf thickness: 40mm
G. Gear transmission system
H. Forming machine base: 30mm steel plate welding
I. Punching and shearing die material: Cr12Mov heat treatment
J. Punching and shearing form: non-stop tracking implementation, servo motor control (if the distance between the same hole or the total length is less than 500mm, stop punching or cutting)
K. 3 sets of punching dies, 2 sets of cutting dies
L. Servo motor 4 sets
M. Machine running speed: less than or equal to 15 meters / minute
N. Rolling plate thickness: 1.2mm and below, steel plate strength is G550
4. Equipment production process:
Unwinding - leveling - punching - forming - shearing - receiving

5. The accessories of the selected equipment need to meet the above production needs.

T-shaped keel automatic corner bone forming machine

Automatic keel machine design:

We will use a double-row wheel design, respectively, C and U, no manual adjustment. With double punching device, the punching device can be adjusted left and right, and the punching mode is servo motor drive chasing punching. The punching data is stored in 15 groups and can be powered off. The forming system is designed with 12 rows of forming wheels, and the forming wheel is made of Cr12Mov. Type C, U type common set of cutting device, this cutting device can move left and right, when it is necessary to produce c type, move to c type, when producing u type, move to u type. The cutting method is servo motor drive tracking cut (twist).
6. Another 90mm square hole punching size is 94mm

CATEGORIES

LATEST NEWS

CONTACT US

Contact:

Phone: 15832720666

Tel: 15832720666

Email: ceo@zhongtuocn.com

Add:

六月综合婷婷俺去俺来也,日本一区二区高清道国产,久久无码高潮喷水,99热国产这里只有精品6